MATERIAL SAFETY DATA SHEET


SECTION I. PRODUCT NAME AND COMPANY IDENTIFICATION


PRODUCT NAME:              FINISH MASTER

MANUFACTURER :           THE ALFIERI - McBEE CORPORATION

                                                  707 SHEPHERD LANE, SUITE 103

                                                 GARLAND, TEXAS 74042

                                                 REGULAR TELEPHONE NUMBER: (972) 494-4800

                                                 EMERGENCY TELEPHONE NUMBER (972) 414-3317

                                                 DATE PREPARED JUNE - 09-2003


SECTION II. INGREDIENTS:

A.

INGREDIENT                                       APPROX WT. %            CAS NUMBER                HAZARD DATA

Aqueous  Urethane Copolymer            48-50                                                                    Not Established

Water                                                           41-43                           7732-18-5                         Not Established

Dipropylene Glycol                                   3-4                             2991-28-2                         Not Established    

Monobutyl Ether Additives                   1-3                                 Various

Waxes                                                            4-6


B. NPCA: HAZARDOUS MATERIAL IDENTIFICATION SYSTEM

HEATH: 1

FLAMMABILITY 0

REACTIVITY 0


C. The precise composition of this mixture is proprietary information. A more complete disclosure package is available and will be provided to a physician or nurse in the event of a medical emergency



SECTION III. PHYSICAL DATA:


APPEARANCE AND ODOR:                                  Non viscous liquid with mild odor.

APPROXIMATE FREEZING POINT:                  < 0 C (<32 F)

APPROXIMATE BOILING RANGE:                   Aqueous system, not determined

APPROXIMATE VAPOR PRESSURE:               Aqueous system, not determined

SOLUBILITY IN WATER:                                    Dilutable in all proportions

SPECIFIC GRAVITY:                                             1.01 - 1.03

PH:                                                                              7 - 9

% VOLATILES                                                         77 - 79

VAPOR DENSITY (Air =1)                                  <1

EVAPORATION RATE (Butyl acetate = 1)     <1

VOC (less water)                                                  0.65 lbs / gallon



SECTION IV. FIRE AND EXPLOSION HAZARD DATA:

FLASH POINT, AUTO IGNITION TEMPERATURE, UPPER AND LOWER EXPLOSIVE LIMITS (%) :

Not Determined ( Aqueous system)


EXTINGUISHING MEDIA:

Non-Flammable (Aqueous system). Will not burn until all water has evaporated. Use Water Fog, Carbon Dioxide, Dry Chemical, or all purpose foam


SPECIAL FIRE FIGHTING PROCEDURES:

Wear self contained- breathing apparatus and protective clothing to prevent contact with skin and eyes. Use water spray to keep fire-exposed containers cool.


UNUSUAL FIRE AND EXPLOSION HAZARDS:

Product does not burn until all water has evaporated but it may spatter if the temperature exceeds the boiling point of water. Dried solids can burn giving off oxides of carbon and nitrogen.


SECTION V. REACTIVITY DATA:

STABILITY: Stable


INCOMPATIBILITY: Avoid contact with acids, strong alkalies, and oxidizing agents.


HAZARDOUS DECOMPOSITION PRODUCTS: Burning can produce carbon monoxide and carbon dioxide


HAZARDOUS POLYMERIZATION: Will not occur


SECTION VI HEATH HAZARD DATA:

A. EXPOSURE LIMITS:

OSHA Permissable Exposure Limit (PEL) and Threshold Limit Value (ACGIH) Not Established.


B . EFFECTS OF ACUTE OVEREXPOSURE

INGESTION: No evidence of adverse effects from available information.

INHALATION: Inhalation of vapors in a poorly ventilated area may be irritating to the eyes, mucous membranes, and respiratory tract and may produce symptoms of headaches and nausea.


SKIN CONTACT: May be harmful if absorbed through the skin.


EYE CONTACT: May cause irratation.


C. EMERGENCY FIRST AID PROCEDURES

INGESTION: Do Not induce vomiting. Get prompt medical help.


INHALATION: Remove from exposure to fresh air. Get medical help if above symptoms develop.


EYE AND SKIN CONTACT: Immediately flush eyes with clean water until water is no longer cloudy. Wash skin with soap and water until water is not cloudy. Remove and wash any soaked clothing.


SECTION VII. PRECAUTIONS FOR SAFE HANDLING AND USE:


STEPS TO BE TAKEN IN CASE OF A SPILL: Restrict area to only those personal needed. Spills may be collected with absorbent materials for disposal. Minor spills may be flushed with water to the sewer if permitted by federal, state, and local regulations.


WASTE DISPOSAL METHODS: Incinerate. Observe federal, state, and local laws concerning heath and environment.


PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep away from heat and flame. Since empty container retains product residue, follow warnings even after container is emptied.


SECTION VIII. CONTROL MEASURES:

RESPIRATORY PROTECTION: None should be needed. Use MSHA / NIOSH-approved respirator for organic vapors if needed.


VENTILATION: General (mechanical) room ventilation is expected to be satisfactory. Use local exhaust to control mist or vapor.


EYE AND SKIN PROTECTION: Safety glasses and protective gloves should be worn. An impermeable apron or smock should be worn to minimize skin contact.


OTHER CONTROL MEASURES: A safety shower, eye bath, and washing facilities should be available. Wash thoroughly after handling. Keep container closed when not in use.

SECTION IX. SPECIAL STORAGE AND HANDLING PRECAUTIONS:


Avoid breathing vapors in top of shipping containers. Keep containers closed. Use with adequate ventilation. Avoid contact with skin and clothing. Wash thoroughly after handling. Keep away from heat and flame.



Home Back
Copyright 2018 Alfieri-McBee Corporation All Rights Reserved

Revised 05/2020